1 7

Slick - Ceramic Spray Coating

Slick - Ceramic Spray Coating

$24.99 USD
$24.99 USD
Sale Sold out

SL1610

Ceramic Spray Coating

Slick is your go-to ceramic spray sealant. Infused with a 15% concentration of SiO2, Slick provides 6 months of increased hydrophobic, chemical resisting, and dirt-repelling properties. Traditional ceramic coatings are difficult to install, but Slick has a simple spray-on wipe-off application. This coating can be used on its own or as a topper for existing ceramic coatings.

  • Water beading and dirt repelling SiO2 properties
  • Continuous protection for up to 6 months
  • Apply to paint, trim, glass, headlights, and more
View full details

Collapsible content

Details

Volume: 16 fl oz (473mL)

pH Level: 7 (neutral)

Dilution: Ready to spray

Scent: Fresh

Application: Spray bottle. Apply evenly with microfiber cloth, then buff off with a clean microfiber cloth.

Notes: Preparation is key here. For Slick to work as well as possible it needs to be applied to clean, decontaminated paint. The most ideal preparation would be full paint correction (high-pH wash, iron fallout remover, clay bar, compound/polish, IPA wipe, then application of Slick). If paint is relatively clean and decontaminated Slick will still perform quite well. Slick can be applied to wet paint immediately following a wash and works as a standalone sealant or a topper for other ceramic coatings. Slick can also be used as a quick detail spray when protection is desired, which Swift does not provide.

Regulatory: Safety Data Sheet

FAQ

Coming soon

How to Use

  1. For best results decontaminate vehicle with a high pH soap (or by adding 1oz of Clean into a foam cannon or wash bucket with Wash) followed by an iron remover and clay bar. Use Swift as a clay bar lubricant.
  2. Wear skin and eye protection. Shake well before use. Only apply to a clean, cool surface. Work on one section at a time. Slick may be applied to wet or dry surfaces.
  3. Spray Slick directly onto vehicle or onto MF cloth.
  4. With a MF cloth evenly distribute over the surface.
  5. With a new, clean MF cloth buff off. For added protection, repeat application after 1 hour. Keep vehicle dry for 12hrs after application to enable curing.
  6. For maintenance, use a pH-neutral car wash soap such as Wash so as to not degrade the coating. Reapply Slick every 6 months or as needed.